找回密码
 立即注册

QQ登录

只需一步,快速开始

教程经验总索引TVMW5/小日本5 索引【视频转换】小日本4/TE4XP 索引【视频转换】TAW4 / TDA3 索引【DVD打包软件】
Nero 索引DVD-Lab 索引【DVD打包软件】编解码器 索引 【必读】固顶帖011号
查看: 16720|回复: 9

[资料] TMPGEnc 4.0 XPress 版本修订历史(更新记录)中英对照【更新到4.7.7.307】

[复制链接]

9328

威望

244

金钱

1万

贡献

管理员

自由的灵魂

积分
99815
主题
5263
回帖
26212
注册时间
2003-4-10
最后登录
2024-3-29
发表于 2008-12-7 13:24:59 | 显示全部楼层 |阅读模式

马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。

您需要 登录 才可以下载或查看,没有账号?立即注册

×
本帖最后由 IsaacZ 于 2010-8-24 21:10 编辑



相关索引与下载页面: TMPGEnc 4.0 XPress 专题索引页 (小日本4 / TE4XP/ TE4)

说明:尽管官方中文版也有最新功能介绍页面,但是更新没有英文版及时,最新功能和修订历史主要在英文版页面上。



官方中文版更新记录页面
官方英文版更新记录页面



没想到官方中文版再度落后,IsaacZ只好再次手译最新版本更新说明:

TMPGEnc 4.0 XPress Version 4.7.7.307 - June 16, 2010


Added
新增功能

CUDA - CUDA 3.0 support. (There is no functional difference in TMPGEnc 4.0 XPress when using CUDA 2.3 or 3.0).
This addition corrects the impossibility to launch TMPGEnc 4.0 XPress when a NVIDIA® GeForce GTX400 series video card (with a Fermi architecture graphic chip) is present.
*CUDA 3.0 support is available only for the GeForce GTX400 series video card. *Accessing the GeForce GTX400 series video card CUDA function requires the NVIDIA graphic driver ver. 197.13 or newer version.
CUDA - 支持 CUDA 3.0。(在 TMPGEnc 4.0 XPress 中使用  CUDA 2.3 还是 3.0 没有功能上的差别。)
此新增功能解决了装有 NVIDIA® GeForce GTX400 系列显卡(带Fermi架构图形芯片) 的机器无法启动 TMPGEnc 4.0 XPress 的问题。
*CUDA 3.0 仅在 GeForce GTX400 系列显卡上面获得支持。*进入GeForce GTX400系列显卡的CUDA功能需要197.13版本以上NVIDIA图形驱动。
FixedAVCHD file reader updated. Some data would cause the continuous display of the same picture.
AVCHD 文件阅读器更新。某些数据可能造成同一帧画面持续播放。
Fixed
MPEG file reader updated, allowing the correction of the issues listed below.
  • TS files containing abnormal packets would be processed as normal packets, causing an error during the importation;
  • Some TS files would be mistakenly recognized as a PS file;
  • Linear PCM at 192 kHz would not be correctly processed.

MPEG 文件阅读器更新,使下列问题得以修正:
  • TS 文件包含不正常数据包时却被当作正常数据包处理,在导入过程中造成错误;
  • 一些 TS 文件被错误地识别为 PS 文件
  • 192 kHz 的线性PCM音频不能正确处理。
Fixed
FLV file reader updated.
FLV文件阅读器更新。
Fixed
Conversion to PS of some WTV files containing AAC audio would suddenly come to a stop.
转换某些包含AAC音频的 WTV 文件到 PS 时,可能会突然中止。
Fixed
DVD-Video with a VOB containing a lot of useless data would not be correctly imported.
导入 DVD-video 时,若其中一个VOB 文件包含大量无用数据,会造成此 DVD 无法正确导入。
Fixed
When importing DVD-Video content through the DVD reader, if a problem occurs in a title, only this title is discarded instead of the whole DVD-Video.
当通过DVD阅读器导入DVD-Video内容时,如果一个标题出现问题,则只丢弃此标题而不是整个DVD-Video。
Fixed
Some transitions would not generate the proper effect.
一些转场不能生成正确的特效。

Improved
功能改进

Some JPEG data would be imported with added noise.
导入一些 JPEG 数据时图像会产生噪声问题得到改进。
Fixed
Other minor fixes
其他细微修正


2010.03.30 / TMPGEnc 4.0 XPress Ver.4.7.6.304


<新增功能>
・更新支援CUDA 2.3。
同时对 NVIDIA 的图形卡驱动程序也要求具有 Ver190.38 或更高版本。
(如果图形驱动程序低於Ver190.38,将无法使用 CUDA 功能。)
・增加支持了一部分前版本无法读取的 WTV 格式文件。

<功能改进>
・更新了 MP4/AVCHD 文件阅读器,同时修正了以下问题。
- 一部分文件无法正常读取的问题
- 一部分文件以倍数播放的问题
 - 在特定系统环境下视频出现粉红噪点
 - 在特定系统环境下视频出现类似回扫线的噪点
・改进了内存使用方法,使当内存不足等引起的“内存不足”以及“取样格式错误”等错误讯息发生的问题得到改善。主要体现如下。
- 输出设置为“全部的素材连接成一个文件(或系列独立文件)输出”时内存使用量大幅度减少
- 有效控制了在 Windows XP 系统环境下大量使用了内存地址空间的现象
- 降低了相对含有大容量内存的PC在读取文件时的缓冲区使用量
・使MPEG 文件阅读器可以读取只含有 PTS 数据的 MPEG 文件。
・修正了使用 Dolby Digital 解码器在解码处理时如遇错误数据,出错之后的部分没有声音的问题。
・修正了在读取一部分 DVD-Video 数据时,无法读取特定章节的内容的问题。
・修正了当以50倍等大幅度的画面大小转换时 NearestNeighbor,BiLinear 可能发生错误的问题。
・使用拖拉读取 WTV 文件时,自动地打开素材精灵。
・修正了在一部分系统环境下,剪切编辑画面的预览显示以及按钮图标的显示发生问题,和声音波形处出现“没有声音”讯息的问题。

<程序修正>
・修正了当输出 Windows Media Video 时,如果选择“注册关键格设置”,根据系统环境不同,编码结束时发生错误的问题。  
・修正了在将 WTV 文件转换为 MPEG-2 PS 时,对於一部分的视频采集卡所录制的数据无法正确转换的问题。
・修正了在以 AVI1.0 设置输出 DivX 文件时,在 Windows 7 初期版本中的解码模块无法正确播放的问题。
・修正了在批处理编码的“编辑”编码项目时,如果输出文件夹/文件栏清空时,无法再次从“打开”设置以及“取消”的问题。
・修正了音频噪声滤除处理时,在执行预览后,改变参数设置时无法正确处理的问题。
・修正了不含音声的素材在读入含有“音频噪声滤除或“音频淡入/淡出”的滤镜处理模板时,死锁的问题。
・以及其他细微的修正。


以下是小日本 TMPGEnc 4.0 XPress 英文版的更新历史,由IsaacZ手译:

Revision History (程序版本修订历史)

TMPGEnc 4.0 XPress Version 4.7.4.299 - January 11, 2010


Added
新增功能
AAC 5.1 ch (6 channels) import support. (Importation of an MPEG-2 TS file containing an AAC stream up to 5.1 channels is now possible.)
In addition, when importing an AAC stream you can manually set the number of channels in the "Clip properties" stage of the "Clip editor" window.
支持导入 AAC 5.1 声道(6声道)。(包含5.1声道音频流的 MPEG-2 TS 文件现在已能导入。)
此外,当导入AAC音频流时,可以在“素材特性”(输入)阶段里的“剪切设置”标签中手工设置声道数量。
AddedMultistream selector function in the MPEG file reader.
You now have the possibility to select a specific video and audio stream when the MPEG-1/2 source file contains several video and audio streams.
MPEG文件阅读器(源滤镜)中增加“多流选择器”功能。
现在当导入的MPEG-1/2源文件包含数个视频和音频流时,你可以自由选择使用某个特定的视频和音频流。
AddedSupport of the Microsoft TV recorder file format "WTV".
(WTV file importation is possible on the computer that recorded the file, or can create such files, and are not copy-protected.)
支持Microsoft TV录像格式“WTV”文件。
(WTV文件的导入仅在满足以下条件的电脑上可以使用:录制过这种文件或可以创建这种文件,并且待导入的WTV文件未受复制保护。)

Improved
功能改进
MP4/AVCHD File Reader updated.
Should allow the importation of files that could not be previously imported, and solve the playback speed issue.
更新了 MP4/AVCHD 文件阅读器。
先前不能导入的文件现在应可正确导入。解决了播放速度问题。
ImprovedYUV color space information contained in the source file is now taken in account when imported through the MP4/AVCHD File Reader. If no color space information is available, the BT.709 or SMPTE 170M color space is automatically selected according to the pixel rate.
使用 MP4/AVCHD 文件阅读器导入的源文件内如包含 YUV 色彩空间信息,会直接使用之。如不包含,则根据点频率(像素频)自动判别色彩空间为 BT.709 或 SMPTE 170M。
ImprovedWhen outputting an MPEG-4 file, the YUV color space is selected according to the resolution and framerate, the color space is then converted to the selection before the encoding stage.
输出MPEG-4文件时,会根据分辨率和帧率先选择 YUV 色彩空间,再于编码前转换成所选择的色彩空间。
ImprovedWhen the Batch encode tool fails to retreive the automatically saved batch list it now displays an error message, erases the batch list and resets.
当批处理编码工具不能获取自动生成的批理任务列表时,现在会显示一条错误信息,然后删除并重置批处理表单。
ImprovedFollowing a silence, the audio uniformization filter could highly increase the volume, resulting in an explosion-like effect. The improved filter reduces the occurence of such an issue.
使用“音量均化”滤镜时,原来在一段无声之后,音量可能会突然增大,并导致爆音。现在此滤镜已经改善,减低了这种问题的发生机率。

Fixed
程序修正
An audio gap would appear when continuing to import a file through the DirectShow reader without seeking it.
继续通过 DirectShow 阅读器(滤镜)导入一个文件未对之检索会导致音频间隙出现。
FixedThe DirectShow Reader audio management has been adjusted, allowing the DivX Reader to correctly get the audio.
调整了 DirectShow 阅读器(滤镜)的音频管理功能,允许 DivX 滤镜正确得到音频。
FixedAAC decoding now resumes instead of stopping after some corrupted data has been encountered.
AAC音频解码过程中如遇到损坏的数据现在可继续解码,而非像原来那样停止解码。
FixedSome flawed header or trailer MPEG files are now importable through the MPEG File Reader.
一些头部或尾部有错的 MPEG 文件现在用 MPEG 文件阅读器已可导入。
FixedThe Windows Media Audio file output does not allow the registration of unexpected file extensions anymore.
Windows Media Audio 文件输出不再允许注册非标准文件扩展名。
FixedThe DivX file output basic mode would always set the level to Medium even when Low or High was selected.
DivX 文件输出的基本模式总是在“中”档位,即使已经选择了“低”或“高”。
FixedIn the DivX file output, reducing the profile would display a wrong framerate in the window.
输出为 DivX 文件时,减低配置会在窗口中显示一个错误的帧率。现已修正。
FixedIn the DivX file output, it was possible to select a non-standard MP3 bitrate.
输出为 DivX 文件时,原来可能选择到一个非标准的 MP3 比特率。现已修正。
FixedThe Batch encode tool would sometimes display an error message when started, and not display it when restarted.
批处理编码工具启动时有时显示一条错误信息,而再次重启此工具又不再显示。
FixedThe WAVE file output advanced mode would note .1 ch even when no .1 ch was selected.
WAVE 文件输出的高级模式会标记为 .1 ch ,即使并未选择任何 .1 ch 。
FixedThe Smart sharpness filter picture edge processing is stricter, reducing the occurence of possible problems.
“智能锐化”滤镜的画面边缘处理现在更加严格,减低错误的发生机率。
FixedThe seek bar motion is now smoother in the Preview display window, or when disabling the thumbnail display in the Clip cut-edit window.
搜索条滑动更加流畅,见于:输出预览显示窗口;素材“剪切设置”窗口(禁用缩略图显示后)。
FixedOther minor fixes.
其他小修正。



TMPGEnc 4.0 XPress Version 4.7.3.292 - August 18, 2009


Added
新增功能
DivX encoder/decoder updated to the latest version.
DivX 编解码器更新到最新版本。
AddedDivX file output support extended to 1080p.
DivX 文件输出支持扩展到1080p。
AddedDivX output offers an AVI container type selection. (1080p profile is AVI-2 container type only). Because of this addition, the "Partition" tab is renamed as "File" tab.
DivX 输出可选 AVI 容器类型。(1080p 限制必须使用 AVI-2 容器)。因为这个功能的添加,“Partition(分割)”标签改名为“File(文件)”。
AddedDivX file output maximum bitrate is updated to support the new profile specifications (The GMC option is available when the profile is set to "none" and the resolution is no greater than 1024x768).
DivX 文件输出最大码率更新,可支持最新配置定义(当配置文件设置为“无”时 GMC 选项可用,并且分辨率限制在 1027x768)。
Improved
功能改进
Audio seek processing for DirectShow filter type source.
增强了 DirectShow 镜像读入的源文件的音频搜索处理。
ImprovedMemory usage for the time-based noise filter is reduced.
基于解码时间的视频降噪滤镜的内存占用降低。
ImprovedOutput stage: output start, batch registration and preview can be activated through keyboard shortcuts:
Encode start/stop = CTRL + Shift + S
Batch registration = CTRL + Shift + B
Preview = CTRL + Shift + P
“输出”阶段:开始编码、登入批处理编码工具、显示输出预览均可通过键盘快捷键激活:
编码开始/停止 = CTRL + Shift + S
登入批处理编码工具 = CTRL + Shift + B
显示输出预览 = CTRL + Shift + P
ImprovedThe MPEG-4 AVC file output bitrate control mode 2 pass Constant bitrate is removed. (Project or output setting template containing the 2 pass Constant bitrate option is automatically ajusted to 1 pass Constant bitrate.)
去除了编码输出 MPEG-4 AVC 文件时的码率控制模式——“二次编码恒定码率”。(已有项目或输出设置模板中如果包含“二次编码恒定码率”选项会被自动调整为“一次编码恒定码率”。)
ImprovedThe MPEG-4 ISO file output has Maximum bitrate, VBV buffer and Quarter pixel options added, allowing improvement of the picture quality. Some settings of the "Video" tab are now in the "ISO" tab.
编码输出 MPEG-4 ISO 文件时添加了“最高码率、VBV缓冲区、1/4像素”选项以改善画质。“视频”标签下的某些选项现在移至“ISO”标签页下。
ImprovedDivX file output "File" tab displays a warning that used to appear when moving from the Format stage to the "Output" stage.
编码输出 DivX 文件时的“文件”标签页内现在显示一则警告信息,此信息原来显示于从“输出”阶段向“编码”阶段切换的时候。
Fixed
程序修正
Some MPEG-2 TS file could not be imported correctly.
某些 MPEG-2 TS 文件无法正确导入。
FixedSome outputted non-standard DVD-Video or DVD-Video header containing garbage data could not be imported correctly.
某些先前输出的非标准DVD视频或头部包含垃圾数据的DVD视频无法正确导入。
FixedSome out of standard MPEG-4 files could not be imported correctly.
某些超出标准的MPEG-4文件无法正确导入。
FixedSome filter processes could raise an exception and instead of correctly displaying an error would stop the encode process.
某些滤镜处理过程可能导致例外错误,此种情况下本应显示一个错误信息,却中止了编码进程。
FixedAVCHD files generated by a camcorder would not be imported entirely.
由便携式摄像机生成的 AVCDHD 文件不能完整导入。
FixedAn insufficient memory error would occur when encoding the biggest WMV clip registered in the Source stage.
素材列表中最大的一个WMV文件被编码时会提示“内存不足”错误。
FixedUsing the Smart Sharpness filter in CUDA mode would sometimes slow down the processing speed.
CUDA模式下使用“智能锐化”滤镜有时会导致处理速度变慢。
FixedSometimes when starting a batch output in the Batch encode tool, an output setting importation error would arise, and the output would start with different settings.
使用批处理编码工具开始执行一个批处理编码任务时,有时会出现“编码设置导入错误”,造成批处理编码时使用的并非是预先设置好的参数。
FixedLaunching the Batch encode tool would display an error that would not appear after restarting the Batch encode tool.
启动批处理编码工具时会出现一个错误,而重启批处理编码工具后错误便不再出现。
FixedWhen using CUDA, the GeForce driver version check would only retreive the display driver version.
使用CUDA时,GeForce驱动版本检查只能获取显示驱动的版本。
FixedWhen using CUDA, an invalid process could arise with the Contour filter.
使用CUDA时,“突出轮廓”滤镜可能导致“无效的进程”错误。
FixedWhen using CUDA, setting a positive value in the Audio gap correction would prevent the audio from playing in the clip header during a preview.
使用CUDA时,“音频间隙校正”处输入一个正值会导致输出预览时头部无声。
FixedOther minor fixes.
其他微小修正。

SpursEngine* File Output

SpursEngine* 文件输出



Added
新增功能
"Tighten up bitrate limit" option added. This option allows you to control the SpursEngine bitrate overflow. (Previous versions had this option always enabled).
添加了“加强码率控制”选择项。这个选项允许你控制 SpursEngine 码率溢出。(早先的版本总是开启这个选项。)(IsaacZ注:现在你可以自由选择是否开启。)
AddedThe MPEG-4 AVC output VBV buffer size maximum value is increased from 2047 KB to 4094 KB.
MPEG-4 AVC 编码的 VBV 缓冲区最大值从原来的2047 KB 增加到 4094 KB。
Fixed
程序修正
During the SpursEngine plug-in device check, the SpursEngine board could not be correctly recognized when the drivers were not installed.
在 SpursEngine 插件设备检查过程中,若 SpursEngine 驱动未安装,则 SpursEngine 板不能被正确识别。
FixedThe VBR output would sometimes not function properly. This correction improves the picture quality. (Please install the latest version of the TMPGEnc Movie Plug-in SpursEngine).
VBR 编码输出有时不能正常运作。此次修正改善了画面质量。(请安装最新版本的 TMPGEnc Movie Plug-in SpursEngine 插件)。

* For SpursEngine usage, the TMPGEnc Movie Plug-in SpursEngine and a SpursEngine hardware device are necessary (both sold separately).
* 要使用 SpursEngine ,你必须拥有 TMPGEnc Movie Plug-in SpursEngine 插件和一个 SpursEngine 硬件设备(两者均为独立出售之商品)。



TMPGEnc 4.0 XPress Version 4.7.1.284 - April 27, 2009

Added
新增功能
Support for the TMPGEnc Movie Plug-in SpursEngine.
添加功能:支持 TMPGEnc Movie Plug-in SpursEngine 插件。
(相关参考:倍加喜事及CRI中介軟體公司開始發售SpursEngine對應之動畫編輯軟體 - 可以對MPEG-4 AVC/H.264格式之動畫進行高速編碼的環境得到加強
Toshiba 发布 SpursEngine 图形协同处理芯片
Fixed
程序修正
Some specific MPEG-2 TS data (AVCHD data) would be be processed incorrectly.
修正对某些特定MPEG-2 TS数据(AVCHD 数据)的错误处理
FixedSome specific MPEG-4 file would be be processed incorrectly.
修正某些特定的MPEG-4文件的错误处理。
FixedSome specific audio data would not be correctly decoded by the AAC decoder and resulted in complete absence of audio.
修正AAC解码器对某些特定音频数据的错误解码而导致的完全无声情况。
FixedMPEG-4 file output would sometimes be incorrect in interlace mode.
修正交错模式下MPEG-4文件的输出错误。
FixedThe picture would become green during an output using CUDA. If this problem occurs again an error arises.
修正:使用CUDA输出时画面会变绿,且如果此问题再次发生则出现未知错误。
FixedSome MPEG files could not be read anymore.
修正:某些 MPEG 文件可能无法再次读取。
FixedIn some cases, when multiplexing a MPEG-1 System stream or MPEG-2 Program stream, the PTS would not be placed in the adequate PES.
修正:在某些场合,对一个MPEG-1系统流或MPEG-2系统流进行多路复用时,传输流未能放置于合适的基本流。
FixedThe framerate selector display would become invalid when selecting the "Playback 3:2 pulldown" option in the MPEG output settings.
修正MPEG(-2)输出设置中选择“播放时3:2下拉”时帧率选择器失效问题。
FixedOther minor corrections.
其他微小修正。

Changed
程序修改
CIF resolution selection can no longer be selected in the SpursEngine file output when automatic resolution setting is active for the Super resolution processing.
功能更改:当针对超大分辨率处理的“自动分辨率设置”处于激活状态时,SpursEngine 文件输出中的 “CIF 分辨率选择”不再可用。
ChangedCUDA - CUDA can now be enabled even when the driver version cannot be retreived from certain CUDA supporting video cards with usable CUDA. (Since the driver version can still not be retreived, problems may occur depending on the driver version used. When using CUDA, we recommend you always install the latest version of the driver available from the NVIDIA corporate website.)
功能更改:CUDA - 即使无法获取某些支持CUDA的显卡的驱动版本,CUDA的功能现在也可以被开启了。(因为仍然不能获取显卡驱动版本,根据驱动版本不同,可能出现错误。当使用CUDA时,我们建议您总是使用从 NVIDIA 官方网站上下载的最新显卡驱动。)


TMPGEnc 4.0 XPress Version 4.6.3.268 - December 4, 2008

Fixed
程序修正
CUDA - CUDA usage would not display when at 0%.  
CUDA - CUDA使用率为0时不显示。
FixedCUDA - A color error would appear when using the video noise filter.
CUDA - 修正使用“视频降噪”功能时出现的一处色彩错误。
FixedCUDA - "Simple duplication on stripes only" and "Inverse pulldown (reinforced anti-stripes)" deinterlace mode would not function properly.
CUDA - 修正两种去交错模式功能不正常现象。
FixedWhen used in a Core i7 environment, the determination of the number of CPUs would become invalid.
修正酷睿i7 环境下CPU数量判断会失效问题。
FixedAn error would arise when rotating a picture in the Slideshow editor.
修正在幻灯片编辑器中旋转图片时会出现的错误。


TMPGEnc 4.0 XPress Version 4.6.3.267 - November 19, 2008

FixedCUDA - The deinterlace filter in Inverse pulldown mode did not yield a correct result when used with CUDA.
FixedCUDA - The video Noise reduction/Noise reduction (time) filters would sometimes generate horizontal stripes when used with CUDA.
FixedCUDA - An error would arise when using the Crop filter if the target picture width was below 8 pixels when used with CUDA.
FixedCUDA - The resize filter in bilinear mode would not yield a correct result when used with CUDA.
FixedCUDA - The deinterlace filter in "Replication - simple mode" did not yield a correct result when used with CUDA.
FixedOutput settings would sometimes not be correctly reflected in Windows Media Video output.
FixedA temporary folder was created in random locations such as the desktop and an error would arise during a MPEG-4 2 pass output.
FixedUsing the video fade-in/out filter would slow down the output time.
FixedModifying the aspect ratio in the Clip properties would not be taken in account at the output stage when using the PV3 file reader.
FixedAn error would occur and the preview would be black when importing an AviSynth's AVS file.


TMPGEnc 4.0 XPress Version 4.6.2.266 - October 29, 2008


Added
新增功能
NVIDIA CUDA 2.0 support. Can be used with filters and the MPEG-1/2 decoder. CUDA-capable graphics card required. For more information on CUDA, CUDA supported video cards, and downloading the latest drivers, please see NVIDIA's website.
FixedFor AVI codec output quality, keyframe interval and bitrate would not function properly.
FixedDeadlock could occur when using the VFAPI file reader.
FixedGreen blocknoise could sometimes appear when importing a MPEG-2 PS file through the MPEG file reader.
FixedSome MPEG file aspect ratios could not be properly determined.
FixedImported AAC audio would be delayed by several milliseconds.
FixedMPEG-2 TS file importation would fail when the stream header contains garbled data.
FixedAn error would occur during the output when joining several clips with different YUV colorspace.
FixedThe MPEG tool would output a LPCM file with a *.tlp extension when demultiplexing.
FixedOther minor issues have been fixed.
IsaacZ的发言中如果提到任何字母缩写或专有名词,在本论坛中一般都能搜索到。点此立即搜索点拨论坛。如有搜索不到的,请尝试搜索百度百科,或者跟帖提问。
发帖前请注意看置顶帖。如果你发现自己的问题没有得到回答,说明你的问题提错了地方或者提问前未先阅读本版规则固顶帖011号

0

威望

109

金钱

0

贡献

新手上路

积分
116
主题
1
回帖
43
注册时间
2010-1-5
最后登录
2012-9-9
发表于 2010-1-18 22:26:28 | 显示全部楼层
支持一下。顶顶。
回复

使用道具 举报

0

威望

3103

金钱

11

贡献

中级会员

旗舰

积分
3181
主题
31
回帖
296
注册时间
2009-12-23
最后登录
2013-8-27
发表于 2010-1-21 09:58:56 | 显示全部楼层
支持一下
回复

使用道具 举报

0

威望

27

金钱

0

贡献

新手上路

积分
27
主题
0
回帖
4
注册时间
2010-1-31
最后登录
2018-11-20
发表于 2010-1-31 01:14:23 | 显示全部楼层
谢谢分享!!!!
回复

使用道具 举报

0

威望

47

金钱

0

贡献

新手上路

积分
48
主题
0
回帖
23
注册时间
2009-5-5
最后登录
1970-1-1
发表于 2010-2-19 12:31:13 | 显示全部楼层
支持!
回复

使用道具 举报

0

威望

32

金钱

0

贡献

新手上路

积分
33
主题
1
回帖
7
注册时间
2010-2-15
最后登录
2012-12-12
发表于 2010-3-19 05:01:50 | 显示全部楼层
支持 学习了
回复

使用道具 举报

0

威望

38

金钱

0

贡献

新手上路

积分
38
主题
0
回帖
4
注册时间
2010-5-8
最后登录
2010-5-9
发表于 2010-5-9 21:27:24 | 显示全部楼层
强烈支持,楼主辛苦了。
回复

使用道具 举报

0

威望

129

金钱

0

贡献

新手上路

积分
136
主题
0
回帖
13
注册时间
2010-5-16
最后登录
2024-1-21
发表于 2010-5-16 17:39:07 | 显示全部楼层
视频转换冠军啊
回复

使用道具 举报

0

威望

95

金钱

1

贡献

新手上路

积分
101
主题
1
回帖
15
注册时间
2009-11-22
最后登录
2019-5-17
发表于 2010-6-24 12:25:16 | 显示全部楼层
翻译幸苦
支持
回复

使用道具 举报

0

威望

82

金钱

0

贡献

新手上路

积分
83
主题
0
回帖
18
注册时间
2010-12-17
最后登录
2018-11-20
发表于 2010-12-17 15:15:18 | 显示全部楼层
太多了,还是用中文版的吧。
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

QQ|Archiver|手机版|小黑屋|点拨论坛

GMT+8, 2024-3-29 09:06 , Processed in 1.055048 second(s), 18 queries , Redis On.

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表